Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.

Install the license lamp bulb into the socket.

Fig 1: View Of License Lamp Bulb

Courtesy of GENERAL MOTORS CORP.

Connect the electrical connector.

Fig 2: View Of License Lamp Electrical Connector

Courtesy of GENERAL MOTORS CORP.

Install the license lamp by inserting the left side of the lamp, then the right side.
Press on the lamp until the tab locks.
Close the rear compartment.

Fig 3: Closing License Lamp Rear Compartment

Courtesy of GENERAL MOTORS CORP.