FixVault
Home › Cadillac › 2004 › Seville › Repair and Diagnosis › External Pages › Different car › Section 98 (Seat System) › Repair Instructions › Heated Seat Control Module Replacement - Rear › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Cadillac DeVille. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the heated seat control module (2) to the seat back.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the heated seat control module fasteners (1).

    Tighten:  Tighten the rear heated seat control module to 1.5 N.m (13 lb in).

    3. Fig 1: View Of Heated Seat Control Module & Fasteners
    GM493757Courtesy of GENERAL MOTORS CORP.
  3. Connect the heated seat control module electrical connections.
  4. Install the rear seat back. Refer to Seat Back Replacement - Rear (Standard)  or Seat Back Replacement - Rear (WC2, WC8) .
About FixVault