FixVault
Home › Cadillac › 2004 › Seville › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Gear Heat Shield Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Steering Rack
    GM293350Courtesy of GENERAL MOTORS CORP.
  1. Install the power steering gear heat shield.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the power steering gear heat shield mounting bolts.

    Tighten:  Tighten the power steering gear heat shield mounting bolts to 9 N.m (79 lb in).

  3. Install the electrical harness clip to the power steering gear heat shield.
  4. Rotate the stabilizer shaft into position.
  5. Install the stabilizer shaft links. Refer to Stabilizer Shaft Link Replacement in Front Suspension.
  6. Lower the vehicle.
About FixVault