FixVault
Home › Cadillac › 2004 › Seville › Repair and Diagnosis › Suspension › Wheel Alignment › Wheel Alignment Specifications & Adjustment Procedures › Repair Instructions › Front Toe Adjustment

Front Toe Adjustment

    Fig 1: Identifying 39601
    GM154264Courtesy of GENERAL MOTORS CORP.
  1. Loosen the jam nuts (1) on the tie rod.
    2. NOTE: Care must be taken so that the boots are not twisted when rotating the inner tie rod, or damage to the boots may result.
  2. Rotate the inner tie rod to the required toe specification setting.
    3. NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Tighten the jam nuts on the tie rods.

    Tighten:  Tighten the jam nuts to 64 N.m (47 lb ft).

  4. Recheck the toe settings after tightening the jam nuts.
  5. Readjust the toe setting if necessary.
About FixVault