Removal Procedure

CAUTION: When working with any type of glass or sheet metal with exposed or rough edges, wear approved safety glasses and gloves in order to reduce the chance of personal injury.

Fig 1: Pushing On Edge Of Mirror Face

Courtesy of GENERAL MOTORS CORP.

Push in on one edge of the mirror face, tilting the mirror support to allow finger access.
Grasp the face support firmly, and pull the support from the mirror body.
Disconnect the wire connectors from the support (heated mirror).
Remove the two jackscrews from the mirror face support.

Fig 2: View Of Jackscrew
Courtesy of GENERAL MOTORS CORP.
1. Bend the jackscrew over.
2. Press down on the side of the jackscrew, popping the jackscrew from the mirror face support.
3. Save the jackscrews for reinstallation to the mirror motor.