FixVault
Home › Cadillac › 2004 › XLR › Repair and Diagnosis › Engine Mechanical › Cooling System (Mechanical) › Engine Cooling System › Repair Instructions › Radiator Support Replacement › Installation Procedure

Installation Procedure

    Fig 1: Removing/Installing Radiator Support
    GM928978Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Position the radiator support in the correct relationship to the fan shroud.
  1. Install the radiator support.
    2. Fig 2: Removing/Installing Radiator Support Bolts
    GM928973Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the radiator support bolts.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

  3. Connect the surge tank inlet hose assembly to the radiator support tabs.
    4. Fig 3: Disconnecting/Connecting MAF Sensor Wire
    GM928982Courtesy of GENERAL MOTORS CORP.
  4. Connect the MAF sensor wire (1) to the radiator support retainer clip.
  5. Install the air cleaner assembly. Refer to Air Cleaner Assembly Replacement in Engine Controls - 4.6L.
About FixVault