FixVault
Home › Cadillac › 2004 › XLR › Repair and Diagnosis › External Pages › Different car › Section 105 (Antilock Brake System, Traction Control System & Stability Control System) › Repair Instructions › Traction Control Switch Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Traction Control Switch & Mounting Screws
    GM1250989Courtesy of GENERAL MOTORS CORP.
  1. Remove the console shift lever bezel. Refer to Console Shift Lever Bezel Replacement in Instrument Panel, Gages, and Console.
  2. Disconnect the traction control electrical connector.
  3. Remove the trim plate.
  4. Remove the two traction control mounting screws (1).
  5. Remove the traction control switch (2).
About FixVault