FixVault
Home › Cadillac › 2004 › XLR › Repair and Diagnosis › Steering › Power Steering System › Repair Instructions › Power Steering Pressure Pipe/Hose Replacement › Installation Procedure

Installation Procedure

    Fig 1: Power Steering Pressure Hose
    GM1334629Courtesy of GENERAL MOTORS CORP.
  1. Install the power steering pressure hose to the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the power steering pressure hose to the power steering gear.

    Tighten:  Tighten the fitting to 27 N.m (20 lb ft).

    3. Fig 2: Power Steering Pressure Hose, Pump & Gear
    GM1334646Courtesy of GENERAL MOTORS CORP.
  3. Install the power steering pressure hose to the power steering pump.

    Tighten:  Tighten the fitting to 27 N.m (20 lb ft).

  4. Lower the vehicle.
  5. Bleed the power steering system. Refer to Bleeding the Power Steering System .
About FixVault