FixVault
Home › Cadillac › 2004 › XLR › Repair and Diagnosis › Steering › Steering Wheel And Steering Column › Repair Instructions › Multifunction, Turn Signal Switch Replacement › Installation Procedure

Installation Procedure

  1. Connect the multifunction switch electrical connectors.
  2. Install the multifunction switch to the steering column.
    3. Fig 1: Multifunction Switch & Retaining Screws
    GM420196Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  3. Install the retaining screws to the multifunction switch.

    Tighten:  Tighten the screws to 7 N.m (62 lb in).

  4. Install the steering column trim covers. Refer to Steering Column Trim Covers Replacement .
  5. Enable the SIR system. Refer to SIR Disabling and Enabling Zone 3 in SIR.
About FixVault