FixVault
Home › Cadillac › 2005 › CTS Base, 2.8 T, Automatic › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Computer/Integrating Systems › Repair Instructions › Data Link Connector Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Data Link Connector
    GM700917Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the screws securing the data link connector to the I/P carrier.

    Tighten:  Tighten the screws to 2 N.m (18 lb in).

  2. Install the I/P closeout panel. Refer to Closeout/Insulator Panel Replacement - Left in Instrument Panel, Gages, and Console.
About FixVault