FixVault
Home › Cadillac › 2005 › CTS Base, 2.8 T, Automatic › Repair and Diagnosis › Engine Performance › System › Engine Controls - 2.8L - Introduction › Repair Instructions › Barometric Pressure (BARO) Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying Barometric Pressure Sensor And Electrical Connector
    GM945437Courtesy of GENERAL MOTORS CORP.
  1. Turn the ignition OFF.
  2. Disconnect the barometric pressure (BARO) sensor electrical connector.
    3. Fig 2: View Of BARO Sensor
    GM1285192Courtesy of GENERAL MOTORS CORP.
  3. Remove the BARO sensor bolt.
  4. Remove the BARO sensor.
About FixVault