FixVault
Home › Cadillac › 2005 › CTS Base, 3.6 7, Automatic › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transmission - Introduction & Repair Instructions › Repair Instructions › Shift Control Linkage Replacement › Removal Procedure

Removal Procedure

  1. Position the shift lever in PARK.
  2. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
    3. Fig 1: View Of Shift Control Linkage Rod & Adjustment Nut
    GM830370Courtesy of GENERAL MOTORS CORP.
  3. Remove the nut from the shift control linkage rod.
  4. Disconnect the shift control linkage rod from the shift control assembly.
    5. Fig 2: Identifying Shift Linkage
    GM785877Courtesy of GENERAL MOTORS CORP.
  5. Remove the manual shift shaft nut.
  6. Remove the shift control linkage from the vehicle.
About FixVault