FixVault
Home › Cadillac › 2005 › CTS V › Repair and Diagnosis › Engine Performance › System › Engine Controls - 5.7L - Introduction › Repair Instructions › Fuel Level Sensor Replacement - Primary › Removal Procedure

Removal Procedure

CAUTION: Refer to Gasoline/Gasoline Vapors Caution in Cautions and Notices.
  1. Remove the primary fuel tank module. Refer to Fuel Tank Module Replacement - Primary .
    2. Fig 1: View Of Primary Fuel Level Sensor Electrical Connector
    GM820628Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the fuel level sensor electrical connector (1) from the module.
    3. Fig 2: View Of Fuel Level Sensor & Locking Tab
    GM820629Courtesy of GENERAL MOTORS CORP.
  3. Complete the following in order to remove the fuel level sensor (1) from the module assembly:
    1. Pull the locking tab (2) away from the sensor (1).
    2. Slide the sensor (1) away from the module assembly.
About FixVault