Installation Procedure
WARNING: This page is about a different variant/trim than selected.
- Install the air cleaner intake duct.
- Install the PCV hose to the intake duct resonator.
- Tighten the air cleaner duct clamps.
Tighten:
- Tighten the air cleaner duct clamp at the mass air flow (MAF) sensor to 4 N.m (35 lb in).
- Tighten the air cleaner duct clamp at the throttle body to 7 N.m (35 lb in).
NOTE:
Refer to Fastener Notice
in Cautions and Notices.