FixVault
Home › Cadillac › 2005 › CTS V › Repair and Diagnosis › External Pages › Different variant/trim › Section 4 (Engine Controls - 3.6L - Introduction) › Repair Instructions › Throttle Body Assembly Replacement › Removal Procedure

Removal Procedure

WARNING: This page is about a different variant/trim than selected.
  1. Turn the ignition OFF.
  2. Remove the air cleaner intake duct. Refer to Air Cleaner Intake Duct Replacement .
    3. Fig 1: View Of Throttle Body Electrical Connector
    GM945417Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Disengaging Connectors Notice in Cautions and Notices.
  3. Remove the throttle body electrical connector.
    4. Fig 2: View Of Wiring Harness Conduit
    GM1285256Courtesy of GENERAL MOTORS CORP.
  4. Unlock and reposition the wiring harness conduit.
    5. Fig 3: View Of Throttle Body
    GM1285255Courtesy of GENERAL MOTORS CORP.
  5. Remove the throttle body bolts.
  6. Remove the throttle body and gasket.
About FixVault