FixVault
Home › Cadillac › 2005 › DeVille Base › Repair and Diagnosis › Engine Performance › System › Engine Controls - Introduction › Repair Instructions › Air Cleaner Intake Duct Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of PCM & MAF/IAT Sensor
    GM622423Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the mass air flow/intake air temperature (MAF/IAT) sensor electrical connector.
  2. Loosen the air cleaner intake and MAF/IAT assembly clamps from the throttle body side and air cleaner cover side.
  3. Remove the air cleaner intake and MAF/IAT assembly from the vehicle.
  4. Separate the Air cleaner intake duct from the MAF/IAT sensor.
About FixVault