FixVault
Home › Cadillac › 2005 › DeVille Protection Series › Repair and Diagnosis › Accessories & Equipment › Entertainment Systems › Entertainment System › Repair Instructions › Radio Antenna Module Cable Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Power Lead Connection
    GM428726Courtesy of GENERAL MOTORS CORP.
  1. If the antenna cable is to being replaced, install the antenna cable clips (3) from the antenna cable removed from the vehicle.
  2. Install the antenna cable to the roof beams with the clips (3).
    3. Fig 2: Identifying Antenna Connection
    GM827590Courtesy of GENERAL MOTORS CORP.
  3. Connect the radio antenna connection (1) at the front of the vehicle.
    4. Fig 3: View Of Antenna Module & Radio Antenna Cable
    GM827575Courtesy of GENERAL MOTORS CORP.
  4. Connect the antenna cable (3) to the antenna module (1) at the rear of the vehicle.
  5. Install the headliner. Refer to Headliner Replacement (w/CF5) or Headliner Replacement (w/o CF5) or Headliner Replacement (WC2, WC8) in Interior Trim.
  6. Install the sail panel. Refer to Sail Panel Replacement (Standard) or Sail Panel Replacement (WC2, WC8) in Interior Trim.
  7. Install the windshield garnish molding. Refer to Garnish Molding Replacement - Windshield Pillar (Standard) or Garnish Molding Replacement - Windshield Pillar (WC2, WC8) in Interior Trim.
About FixVault