FixVault
Home › Cadillac › 2005 › DeVille Protection Series › Repair and Diagnosis › Body & Frame › Seats › Seat System - Introduction › Repair Instructions › Heated Seat Control Module Replacement - Rear › Installation Procedure

Installation Procedure

    Fig 1: View Of Heated Seat Module
    GM493757Courtesy of GENERAL MOTORS CORP.
  1. Install the heated seat control module (2) to the seat back.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the heated seat control module fasteners (1).

    Tighten:  Tighten the rear heated seat control module to 1.5 N.m (13 lb. in.).

  3. Connect the heated seat control module electrical connections.
  4. Install the rear seat back. Refer to Seat Back Replacement - Rear (Standard)  or Seat Back Replacement - Rear (WC2, WC8) .
About FixVault