FixVault
Home › Cadillac › 2005 › DeVille Protection Series › Repair and Diagnosis › Engine Performance › System › Engine Controls - Introduction › Repair Instructions › Crankshaft Position (CKP) Sensor Replacement › Removal Procedure

Removal Procedure

    Fig 1: Identifying Crankshaft Position Sensor
    GM602305Courtesy of GENERAL MOTORS CORP.
  1. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle in General Information.
  2. Remove the oil filter adaptor. Refer to Oil Filter Adapter Replacement in Engine Mechanical 4.6L.
  3. Remove the crankshaft sensor electrical connector.
  4. Remove the crankshaft sensor retaining bolt.
  5. Remove the crankshaft sensor.
About FixVault