FixVault
Home › Cadillac › 2005 › DeVille Protection Series › Repair and Diagnosis › Engine Performance › System › Engine Controls - Introduction › Repair Instructions › Knock Sensor (KS) Replacement › Removal Procedure

Removal Procedure

    Fig 1: Knock Sensor (KS) Component View
    GM602292Courtesy of GENERAL MOTORS CORP.
  1. Remove the intake manifold. Refer to Intake Manifold Replacement in Engine Mechanical.
  2. Disconnect the knock sensor electrical connector.
  3. Remove the knock sensor (KS).
About FixVault