Installation Procedure

WARNING: This page is about a different car, the 2005 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.

Fig 1: View Of Intake Manifold Runner Control Solenoid

Courtesy of GENERAL MOTORS CORP.

Install the intake manifold runner control solenoid.

NOTE: Refer to Fastener Notice in Cautions and Notices.

Install the intake manifold runner control solenoid bolts.
Tighten: Tighten the intake manifold runner control solenoid bolts to 10 N.m (89 lb in).
Install the upper intake manifold. Refer to Intake Manifold Replacement - Lower in Engine Mechanical - 2.8L (LP1).