FixVault
Home › Cadillac › 2005 › DeVille Protection Series › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle - Introduction & Repair Instructions › Repair Instructions › Oil Pressure Test Plug Replacement › Installation Procedure

Installation Procedure

    Fig 1: Identifying Oil Pressure Test Plug
    GM784411Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the oil pressure test plug (1).

    Tighten:  Tighten the oil pressure test plug to 12 N.m (106 lb. in.).

  2. Install the throttle body air inlet duct. Refer to Air Cleaner Intake Duct Replacement in Engine Control-4.6L.
About FixVault