FixVault
Home › Cadillac › 2005 › DeVille Protection Series › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle - Introduction & Repair Instructions › Repair Instructions › Shift Control Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Trim Panel
    GM105570Courtesy of GENERAL MOTORS CORP.
  1. Remove the console trim plate. Refer to Trim Plate Replacement - Front Floor Console (DTS) in Instrument Panel, Gages and Console.
    2. Fig 2: View Of Shift Cable Terminal
    GM291754Courtesy of GENERAL MOTORS CORP.
  2. Unsnap the shift cable terminal from the shifter pin.
  3. Disconnect the automatic transmission shift lock actuator solenoid wire harness connector.
    4. Fig 3: View Of Shifter Assembly
    GM291888Courtesy of GENERAL MOTORS CORP.
  4. Remove the shifter fasteners.
  5. Remove the shifter assembly.
About FixVault