FixVault
Home › Cadillac › 2005 › DeVille Protection Series › Repair and Diagnosis › Transmission › Automatic Trans › Automatic Transaxle - Introduction & Repair Instructions › Repair Instructions › Torque Converter Cover Replacement › Installation Procedure

Installation Procedure

    NOTE: Refer to Fastener Notice in Cautions and Notices.
    Fig 1: View Of Torque Converter Cover
    GM627396Courtesy of GENERAL MOTORS CORP.
  1. Install the torque converter cover.

    Tighten:  Tighten the cover bolt to 12 N.m (106 lb. in.).

  2. Install the engine-to-transmission brace and attaching bolts.

    Tighten:  Tighten the bolts to 47 N.m (35 lb. ft.).

  3. Lower the vehicle.
About FixVault