FixVault
Home › Cadillac › 2005 › Escalade EXT › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Computer/Integrating Systems › Repair Instructions › Body Control Module Replacement › Removal Procedure

Removal Procedure

    CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.
  1. Disconnect the negative battery cables.
    2. Fig 1: Knee Bolster & Bolts
    GM348714Courtesy of GENERAL MOTORS CORP.
  2. Remove the knee bolster. Refer to Knee Bolster Replacement in Instrument Panel, Gages, and Console.
    3. Fig 2: Harness Connectors
    GM387553Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the brown connector.
  4. Disconnect all other connectors (1).
  5. Remove the body control module (BCM) from the sliding bracket.
About FixVault