FixVault
Home › Cadillac › 2005 › Escalade EXT › Repair and Diagnosis › Body & Frame › Frames, Subframes & Crossmembers › Frame And Underbody › Repair Instructions › Engine Protection Shield Replacement › Installation Procedure

Installation Procedure

  1. Install the shield to the vehicle. 15 Series is shown, 25 Series is similar.
    2. Fig 1: View Of Engine Protection Shield
    GM349061Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the shield to frame bolts.

    Tighten:  Tighten the bolts to 20 N.m (15 lb ft).

About FixVault