Installation Procedure
WARNING: This page is about a different car, the 2004 GMC Sierra, 2004 GMC Cab & Chassis Sierra, 2004 Chevrolet Silverado, and 2004 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install the DVD player hook (1) into the hook opening.
- Connect the wire connector (1) to the DVD player assembly.
- Install the harness retainer to the panel.
- Swing the rear part of the assembly to the headliner so that the retainer is seated.
- Install the two rear retaining bolts.
Tighten: Tighten the 2 rear retaining bolts to 9 N.m (80 lb in).
- Move the screen to the open position.
- Install the 2 front retaining bolts (2).
Tighten: Tighten the 2 front retaining bolts to 9 N.m (80 lb in).
- Install the rear screw cover.
IMPORTANT:
Ensure the harness is routed to the right side of the large plastic pin as shown (2).
NOTE:
Refer to Fastener Notice
in Cautions and Notices.