FixVault
Home › Cadillac › 2005 › SRX 3.6 7, AWD › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Computer/Integrating Systems › Repair Instructions › Rear Integration Module Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of RIM
    GM1210870Courtesy of GENERAL MOTORS CORP.
  1. Install the RIM to the mounting bracket.
    2. Fig 2: View Of RIM Electrical Connectors
    GM1210878Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connectors (1).
  3. Install the right rear body side trim. Refer to Trim Panel Replacement - Body Side Rear in Interior Trim.
  4. Reprogram the module. Refer to Control Module References .
About FixVault