FixVault
Home › Cadillac › 2005 › STS 3.6 7 › Repair and Diagnosis (Single Page) › Accessories & Equipment › Communication Devices › Computer/Integrating Systems › Repair Instructions › Rear Integration Module Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Rear Integration Module
    GM1466263Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connectors.
  2. Install the module (2) to the bracket.
  3. Install the rear upper compartment trim. Refer to Compartment Trim Panel Replacement - Rear in Body Rear End.
  4. Reprogram the module. Refer to Control Module References .
About FixVault