FixVault
Home › Cadillac › 2005 › STS 3.6 7 › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Computer/Integrating Systems › Repair Instructions › Data Link Connector Replacement › Removal Procedure

Removal Procedure

  1. Remove the knee bolster trim. Refer to Knee Bolster Replacement in Instrument Panel, Gages, and Console.
    2. Fig 1: View Of Data Link Connector
    GM1386648Courtesy of GENERAL MOTORS CORP.
  2. Remove the screws (1) securing the data link connector to the instrument panel (I/P).
About FixVault