FixVault
Home › Cadillac › 2005 › STS 4.6 A, AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System - 4.6L (LH2) - Introduction › Repair Instructions › Air Cleaner Outlet Duct Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Air Cleaner Duct
    GM1201220Courtesy of GENERAL MOTORS CORP.
  1. Install the air cleaner duct to the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Tighten the air cleaner duct clamps at the throttle body and the MAF/IAT sensor.

    Tighten:  Tighten the air duct clamps to 3 N.m (27 lb in).

  3. Connect the PCV tube to the air cleaner duct.
  4. Install the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement in Engine Mechanical - 4.6L (LH2).
About FixVault