FixVault
Home › Cadillac › 2005 › STS 4.6 A, AWD › Repair and Diagnosis › Engine Performance › System › Engine Control System - 4.6L (LH2) - Introduction › Repair Instructions › Knock Sensor (KS) 1 Replacement › Removal Procedure

Removal Procedure

    Fig 1: View Of Intake Manifold & Bolts
    GM928175Courtesy of GENERAL MOTORS CORP.
  1. Remove the intake manifold. Refer to Intake Manifold Replacement in Engine Mechanical - 4.6L (LH2).
    2. Fig 2: View Of Knock Sensors & Electrical Connectors
    GM1284306Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the knock sensor (KS) electrical connector (2).
  3. Remove the KS bolt.
  4. Remove the KS (1).
About FixVault