FixVault
Home › Cadillac › 2005 › XLR › Repair and Diagnosis › Engine Mechanical › Cooling System (Mechanical) › Engine Cooling System › Repair Instructions › Cooling Fan Control Module Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Cooling Fan Control Module
    GM1500602Courtesy of GENERAL MOTORS CORP.
  1. Install the cooling fan control module to the vehicle.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the cooling fan control module retaining bolt.

    Tighten:  Tighten the bolt to 6 N.m (53 lb in).

    3. Fig 2: View Of Cooling Fan Control Module Electrical Connector
    GM1500599Courtesy of GENERAL MOTORS CORP.
  3. Connect the cooling fan control module electrical connector.
  4. Lower the vehicle.
About FixVault