FixVault
Home › Cadillac › 2005 › XLR › Repair and Diagnosis › Engine Performance › System › Engine Controls - Introduction › Repair Instructions › Fuel Filler Hose Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of Fuel Fill Hose & Vent Hose
    GM562230Courtesy of GENERAL MOTORS CORP.
  1. Uncap the opening on the fuel tank.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the fuel fill hose (1) to the fuel tank.

    Tighten:  Tighten the fuel fill hose clamp to 3.5 N.m (31 lb in).

  3. Install the left fuel tank. Refer to Fuel Tank Replacement - Left .
About FixVault