FixVault
Home › Cadillac › 2005 › XLR › Repair and Diagnosis › Engine Performance › System › Engine Controls - Introduction › Repair Instructions › Ignition Coil(s) Replacement - Bank 1 › Removal Procedure

Removal Procedure

    Fig 1: View Of Fuel Injector Sight Shield/Top Cover
    GM1272602Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel injector sight shield. Refer to Fuel Injector Sight Shield Replacement in Engine Mechanical - 4.6L (LH2).
  2. Disconnect the ignition coil wiring harness electrical connector from the coil that is being replaced.
    3. Fig 2: View Of Ignition Coils
    GM1283865Courtesy of GENERAL MOTORS CORP.
  3. Remove the ignition coil retaining bolt.
  4. Remove the ignition coil.
About FixVault