FixVault
Home › Cadillac › 2006 › CTS V › Repair and Diagnosis › External Pages › Different car › Section 249 (Theft Deterrent System) › Repair Instructions › Theft Deterrent Inclination Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: View Of Theft Deterrent Alarm
GM1283464Courtesy of GENERAL MOTORS CORP.
  1. Install the inclination sensor (1) to the bracket.
  2. Connect the electrical connector.
  3. Install the right side body side panel trim. Refer to Body Side Rear Trim Panel Replacement (w/o TB5) or Body Side Rear Trim Panel Replacement (w/TB5) .
About FixVault