FixVault
Home › Cadillac › 2006 › DTS 4.6 9 › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Engine Ground Cable Replacement › Removal Procedure

Removal Procedure

IMPORTANT:
  • Always use replacement cables that are of the same type, diameter and length of the cables that you are replacing.
  • Always route the replacement cable the same way as the original cable.
  1. Remove the front compartment sight shield. Refer to Front Compartment Sight Shields Replacement .
    2. Fig 1: Engine Ground Cable
    GM1664485Courtesy of GENERAL MOTORS CORP.
  2. Remove the bolt securing the engine ground cable to the right side body frame rail.
    3. Fig 2: Generator
    GM1669928Courtesy of GENERAL MOTORS CORP.
  3. Remove the rear generator bolt.
  4. Remove the engine ground cable.
About FixVault