FixVault
Home › Cadillac › 2006 › DTS 4.6 9 › Repair and Diagnosis › Electrical › Charging Systems › Battery, Charging System And Starting System › Repair Instructions › Generator Replacement › Removal Procedure

Removal Procedure

  1. Disconnect the negative battery cable. Refer to Battery Negative Cable Disconnect/Connect Procedure .
  2. Remove the radiator. Refer to Radiator Replacement .
  3. Remove the drive belt. Refer to Drive Belt Replacement .
    4. Fig 1: Engine Wiring Harness Electrical Connector From Generator
    GM1663951Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the engine wiring harness electrical connector (5) from the generator.
    5. Fig 2: Generator Terminals
    GM1670187Courtesy of GENERAL MOTORS CORP.
  5. Reposition the starter solenoid cable protective boot (1) at the generator.
  6. Remove the generator terminal nut (2).
  7. Remove the starter solenoid cable terminal (3) from the generator.
    8. Fig 3: Generator
    GM1669928Courtesy of GENERAL MOTORS CORP.
  8. Remove the generator bolts.
  9. Reposition the engine ground cable.
  10. Remove the generator.
About FixVault