FixVault
Home › Cadillac › 2006 › DTS 4.6 9 › Repair and Diagnosis › Engine Performance › System › Engine Control System - 4.6L - Introduction (2 Of 2) › Repair Instructions › Fuel Level Sensor Wiring Harness Replacement › Installation Procedure

Installation Procedure

    Fig 1: Fuel Level Sensor Wiring Harness
    GM1671759Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel level sensor wiring harness.
  2. Connect the fuel level sensor wiring harness electrical connectors to the pressure sensor and module.
  3. Install the fuel tank. Refer to Fuel Tank Replacement .
About FixVault