FixVault
Home › Cadillac › 2006 › Escalade EXT › Repair and Diagnosis › Accessories & Equipment › Collision/Avoidance › Object Detection System › Repair Instructions › Information Center Telltale Assembly Replacement (Utility) › Installation Procedure

Installation Procedure

    Fig 1: Removing Information Center Telltale Assembly Retaining Screws (Utility)
    GM762783Courtesy of GENERAL MOTORS CORP.
  1. Install the information center telltale assembly to the garnish molding.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the retaining screws (1).

    Tighten:  Tighten the retaining screws to 2 N.m (18 lb in).

  3. Install the rear quarter garnish molding. Refer to Garnish Molding Replacement - Rear Corner in Interior Trim.
About FixVault