FixVault
Home › Cadillac › 2006 › Escalade EXT › Repair and Diagnosis › Accessories & Equipment › Collision/Avoidance › Object Detection System › Repair Instructions › Object Alarm Module Switch Replacement - Rear › Removal Procedure

Removal Procedure

  1. Remove the dash trim bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages and Console.
  2. Grasp the buttons assembly (2) housing and pull outwards.
    3. Fig 1: Removing Rear Object Alarm Module Switch
    GM741402Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector from the rear object alarm module switch.
  4. Remove the switch (1) from the housing (2).
About FixVault