FixVault
Home › Cadillac › 2006 › Escalade EXT › Repair and Diagnosis › Accessories & Equipment › Communication Devices › Computer/Integrating Systems › Repair Instructions › Data Link Connector Replacement › Installation Procedure

Installation Procedure

    Fig 1: Removing Data Link Connector Bolt
    GM786370Courtesy of GENERAL MOTORS CORP.
  1. Install the DLC to the I/P.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the DLC bolt.

    Tighten:  Tighten the bolt to 6 N.m (53 lb in).

About FixVault