FixVault
Home › Cadillac › 2006 › Escalade EXT › Repair and Diagnosis › Accessories & Equipment › Infotainment › Entertainment Systems › Repair Instructions › Radio Antenna Module Cable Replacement (From Radio to Module) › Removal Procedure

Removal Procedure

  1. Remove the I/P trim panel. Refer to Trim Panel Replacement - Instrument Panel (I/P) Upper in Instrument Panel, Gages and Console.
  2. Lower the headliner. Refer to Headliner Replacement in Interior Trim.
  3. Loosen the bolt retaining the radio antenna module in order to disconnect the electrical connector.
    4. Fig 1: Removing Cable From Radio Antenna Module & Cable Clips From Roof
    GM798113Courtesy of GENERAL MOTORS CORP.
  4. Disconnect the cable (2) from the radio antenna module.
  5. Remove the cable clips (1) from the roof.
    6. Fig 2: Removing Cable Clips From A-Pillar & Cable From Radio
    GM798111Courtesy of GENERAL MOTORS CORP.
  6. Remove the cable clips (1) from the A-pillar.
  7. Disconnect the cable (3) from the radio.
  8. Disconnect the electrical wire connector (4).
  9. Remove the radio cable from the vehicle.
About FixVault