FixVault
Home › Cadillac › 2006 › Escalade EXT › Repair and Diagnosis › Electrical › Instrument Panel System Displays, Gauges And Console › Repair Instructions › Console Replacement (w/Console Mounting Bracket) › Installation Procedure

Installation Procedure

  1. Install the rear seat audio control to the console, if equipped. Refer to Audio Control Replacement - Rear Seat in Entertainment.
    2. Fig 1: Identifying Bolts Retaining Console To Instrument Panel
    GM854810Courtesy of GENERAL MOTORS CORP.
  2. Install the console in the vehicle.
  3. Connect the wire connectors.
  4. Move the console forward in order to install the retaining screws.
    5. NOTE: Refer to Fastener Notice in Cautions and Notices.
  5. Install the 2 screws (1).

    Tighten:  Tighten the screws to 4 N.m (35 lb in).

  6. Install the cupholder to the console. Refer to Cupholder Replacement (Non-Luxury)  or Cupholder Replacement (Luxury)  or Cupholder Replacement (Rear) .
  7. Install the upper console bezel. Refer to Bezel Replacement - Floor Console (Non-Luxury Upper)  or Bezel Replacement - Floor Console (Luxury Upper) .
  8. Install the radio amp fuse, if removed. Refer to Electrical Center Identification Views in Wiring Systems.
  9. Install both front seats. Refer to Seat Replacement - Front Bucket in Seats.
About FixVault