FixVault
Home › Cadillac › 2006 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 1207 (Front Drive Axle) › Repair Instructions › Shield Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 GMC Sierra, 2008 GMC Cab & Chassis Sierra, 2008 Chevrolet Silverado, and 2008 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Differential Carrier Shield & Bolts
    GM339429Courtesy of GENERAL MOTORS CORP.
  1. Install the front differential carrier shield.
    2. NOTE: Refer to Fastener Notice .
  2. Install the front differential carrier shield bolts.

    Tighten:  Tighten the front differential carrier shield bolts to 20 N.m (15 lb ft).

  3. Lower the vehicle.
About FixVault