FixVault
Home › Cadillac › 2006 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 1284 (HVAC System - Automatic) › Repair Instructions › Inside Air Temperature Sensor Replacement › Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2008 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Air Temperature Sensor & Aspirator Hose
    GM760802Courtesy of GENERAL MOTORS CORP.
  1. Connect the inside air temperature assembly electrical connector (1).
  2. Connect the inside air temperature assembly tube (3).
  3. Confirm that the foam seal tape is in place and covering the openings on the sides of the grille assembly (2).
  4. Press the inside air temperature assembly (2) into the I/P.
About FixVault