Installation Procedure
WARNING: This page is about a different car, the 2010 GMC Sierra, 2010 GMC Cab & Chassis Sierra, and 2010 Chevrolet Silverado. However, it is still accessible from the selected car via links, so may be relevant.
- Install a new stud. Use washers and a wheel nut and pull the new stud into the hub.
- Install the brake rotor. Refer to Front Brake Rotor Replacement (JD9, JF3, JF7, JG4) or Front Brake Rotor Replacement (JH6, JH7) .
- Install the tire and wheel. Refer to Tire and Wheel Removal and Installation .
- Lower the vehicle.