Installation Procedure

WARNING: This page is about a different car, the 2006 GMC Sierra, 2006 GMC Cab & Chassis Sierra, 2006 Chevrolet Silverado, and 2006 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.

Install the front differential carrier shield.

Fig 1: Installing Differential Carrier Shield & Bolts
Courtesy of GENERAL MOTORS CORP.

NOTE: Refer to FASTENER NOTICE in Cautions and Notices.

Install the front differential carrier shield bolts.
Tighten: Tighten the front differential carrier shield bolts to 20 N.m (15 lb ft).
Lower the vehicle.