FixVault
Home › Cadillac › 2006 › Escalade EXT › Repair and Diagnosis › External Pages › Different car › Section 708 (Antilock Brake System With Traction Control System) › Repair Instructions › Traction Control Switch Replacement (Stabilitrak) › Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2006 GMC Sierra, 2006 GMC Cab & Chassis Sierra, 2006 Chevrolet Silverado, and 2006 Chevrolet Cab & Chassis Silverado. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument panel (I/P) bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages and Console.
  2. Gently lift the retaining tabs (2) and remove the Stabilitrak switch (3) from the I/P assembly (1).
    Fig 1: Removing Stabilitrak Switch
    GM786376Courtesy of GENERAL MOTORS CORP.
    3. Fig 2: Disconnecting Stabilitrak Switch Harness Connector
    GM788223Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the harness connector from the Stabilitrak switch.
About FixVault