FixVault
Home › Cadillac › 2006 › SRX 3.6 7, AWD › Repair and Diagnosis (Single Page) › Accessories & Equipment › Collision/Avoidance › Object Detection System › Repair Instructions › Object Alarm Module Replacement › Installation Procedure

Installation Procedure

    Fig 1: View Of RPA Module
    GM1210903Courtesy of GENERAL MOTORS CORP.
  1. Install the RPA module to the retainers.
    2. Fig 2: View Of RPA Module Electrical Connector
    GM1210898Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connector (1).
  3. Install the rear body side trim. Refer to Trim Panel Replacement - Body Side Rear (w/o TB5) or Trim Panel Replacement - Body Side Rear (w/TB5) in Interior Trim.
About FixVault